Commit c6c4234928d2 for kernel

commit c6c4234928d2eb4f61fecb61067e612d9bdbd2ff
Author: Guenter Roeck <linux@roeck-us.net>
Date:   Mon Aug 3 20:48:11 2026 -0700

    hwmon: (corsair-psu) Fix linear11 calculation

    In corsairpsu_linear11_to_int(), the mantissa is extracted using bitwise
    operations and cast to s16 before being shifted left:

    static int corsairpsu_linear11_to_int(const u16 val, const int scale)
    {
        ...
        const int mant = (((s16)(val & 0x7ff)) << 5) >> 5;
        ...
    }

    Due to C integer promotion rules, the masked value (which is always
    positive) is promoted to a 32-bit integer before the left shift. As a
    result, the sign bit is never extended to bit 31 of the promoted integer.

    When the device hardware reports a negative temperature in Linear11 format
    (such as an ambient temperature probe reporting sub-zero), the negative
    mantissa is parsed incorrectly as a massive positive value. For example,
    -1 becomes 2047, which scales to 2047 degrees Celsius.

    Fix the problem by type casting the result of the left shift operation
    to s16.

    Another problem is left-shifting of negative values. In C, the result of
    left-shifting negative values is undefined. Use a multiplication instead
    to avoid the problem.

    Also use a local s64 variable to store temporary results, change
    the return value type from int to long, and clamp the final value
    to LONG_MIN and LONG_MAX to avoid under- and overflow issues while
    retaining as much information as possible.

    Reported-by: Sashiko <sashiko-bot@kernel.org>
    Cc: Wilken Gottwalt <wilken.gottwalt@posteo.net>
    Signed-off-by: Guenter Roeck <linux@roeck-us.net>
    Tested-by: Wilken Gottwalt <wilken.gottwalt@posteo.net>
    Link: https://lore.kernel.org/r/20260804034811.2385506-1-linux@roeck-us.net
    Signed-off-by: Guenter Roeck <linux@roeck-us.net>

diff --git a/drivers/hwmon/corsair-psu.c b/drivers/hwmon/corsair-psu.c
index ebcaddf337d8..0cf072f86acb 100644
--- a/drivers/hwmon/corsair-psu.c
+++ b/drivers/hwmon/corsair-psu.c
@@ -137,13 +137,18 @@ struct corsairpsu_data {
 };

 /* some values are SMBus LINEAR11 data which need a conversion */
-static int corsairpsu_linear11_to_int(const u16 val, const int scale)
+static long corsairpsu_linear11_to_long(const u16 val, const int scale)
 {
 	const int exp = ((s16)val) >> 11;
-	const int mant = (((s16)(val & 0x7ff)) << 5) >> 5;
-	const int result = mant * scale;
+	const int mant = ((s16)((val & 0x7ff) << 5)) >> 5;
+	s64 result = mant * scale;

-	return (exp >= 0) ? (result << exp) : (result >> -exp);
+	if (exp >= 0)
+		result *= (int)(1UL << exp);
+	else
+		result >>= -exp;
+
+	return clamp(result, LONG_MIN, LONG_MAX);
 }

 /* the micro-controller uses percentage values to control pwm */
@@ -263,13 +268,13 @@ static int corsairpsu_get_value(struct corsairpsu_data *priv, u8 cmd, u8 rail, l
 	case PSU_CMD_RAIL_AMPS:
 	case PSU_CMD_TEMP0:
 	case PSU_CMD_TEMP1:
-		*val = corsairpsu_linear11_to_int(tmp & 0xFFFF, 1000);
+		*val = corsairpsu_linear11_to_long(tmp & 0xFFFF, 1000);
 		break;
 	case PSU_CMD_FAN:
-		*val = corsairpsu_linear11_to_int(tmp & 0xFFFF, 1);
+		*val = corsairpsu_linear11_to_long(tmp & 0xFFFF, 1);
 		break;
 	case PSU_CMD_FAN_PWM_ENABLE:
-		*val = corsairpsu_linear11_to_int(tmp & 0xFFFF, 1);
+		*val = corsairpsu_linear11_to_long(tmp & 0xFFFF, 1);
 		/*
 		 * 0 = automatic mode, means the micro-controller controls the fan using a plan
 		 *     which can be modified, but changing this plan is not supported by this
@@ -283,12 +288,12 @@ static int corsairpsu_get_value(struct corsairpsu_data *priv, u8 cmd, u8 rail, l
 			*val = 2;
 		break;
 	case PSU_CMD_FAN_PWM:
-		*val = corsairpsu_linear11_to_int(tmp & 0xFFFF, 1);
+		*val = corsairpsu_linear11_to_long(tmp & 0xFFFF, 1);
 		*val = corsairpsu_dutycycle_to_pwm(*val);
 		break;
 	case PSU_CMD_RAIL_WATTS:
 	case PSU_CMD_TOTAL_WATTS:
-		*val = corsairpsu_linear11_to_int(tmp & 0xFFFF, 1000000);
+		*val = corsairpsu_linear11_to_long(tmp & 0xFFFF, 1000000);
 		break;
 	case PSU_CMD_TOTAL_UPTIME:
 	case PSU_CMD_UPTIME: